Motorbike Trailer
This is a practical design that is inexpensive and relatively easy to build, as can be seen from the many trailer builds shown below. Includes handy features like tie-down hooks, spare wheel carrier, jerry can holder and a checker plate bed. Features staggered rails for fitting up to 3 bikes, chassis mounted tie-down lugs, two jerry can holders (plans included), spacious drawbar with lots of room for storage or a toolbox, as well as a side-mounted spare wheel carrier.
The plans conform to the Australian National Code of Practice – Building Small Trailers (VSB1). Trailers built to comply with this code of practice can be registered for on-road use in Australia.
All our trailer plans are compliant with relevant ADRs, applicable in all states and territories for new trailer builds under RVS Regulation.
The plan includes a Certificate of Compliance (CoC) for ADR 62 – Drawbar.
DIGITAL DOWNLOAD – Plans are delivered digitally immediately after payment to get your trailer build project going without delay.
$49.00
- Bed Size:    2200x1500mm (±7x5ft)
- Overall Size:   4000x2000mm (13×6.5ft)
- Max. ATM:Â Â Â 1000kg
- TARE:   ±250kg
- Chassis Construction:Â Â Â RHS (various sections)
- Suspension:Â Â Â Single Beam Axle & Leaf Springs
- Options Included:Â Â Â Jerry Can Holders, Tie-down hooks and more
- Contents:Â Â Â 14 detailed part & assembly drawings, 10 page assembly guide, DXF files, pictures
- File Size:Â Â Â 10.3MB (.zip)
TRAILER BUILDS
Jeff’s Motorbike Trailer Build
Jeff built his trailer using our Motorbike Trailer Plan. This is a practical design that [...]
Mick’s Motorbike Trailer Build
Mick used the Motorbike Trailer Plans to build his trailer. A few modifications included reinforcing [...]
Brian’s 4m Enclosed Motorbike Trailer Build
A number of guys have built our 4m Enclosed Motorbike Trailer Plans in a tandem [...]
Stuart’s 4m Enclosed Motorbike Trailer Build
Stuart, trailer builder liminary and man whose talents apparently have no end, built this trailer [...]
Andrew and Sons – 4m Enclosed Motorbike Trailer Build
Queensland trio Andrew and his two teenage sons built this awesome enclosed motorbike trailer – [...]
Troy’s Motorbike Trailer Build
More information on the MOTOBIKE TRAILER plan >>
Aaron’s 4m Enclosed Motorbike Trailer Build
Proud owner Aaron built this black beauty almost exactly to our 4m Motorbike Trailer plans, [...]
John’s 4m Enclosed Motorbike Trailer Build
John sent in these pictures of a fabulous trailer built from our 4m Enclosed Motorbike [...]
More Info
- The motorbike trailer is designed with a ramp that conveniently store away on the trailer bed when not in use.
- The design also includes handy features like tie-down hooks, spare wheel carrier, jerry can holder and chequer plate bed.
- Assembly guide will assist you in the construction and give you heaps of advice on brakes, axles, suspension and other components.
- A premier motorbike trailer that is surprisingly easy to build.
- Features staggered rails for fitting 3 bikes, chassis mounted tie-down lugs, two jerry can holders (plans included) and spacious drawbar – lots of room for storage or a toolbox.
- The rear ramp is held during loading and neatly stows away when you’re on the move.
- The spare wheel is mounted securely on the left hand side (safe for road-side change overs) and leaves lots of room on the deck for the bikes.
- The Assembly Guide gives you 10 pages of support on topics such as Planning, Safety, Tools Required, Welding, Chassis, Suspension, Brakes, Electrical, Registration and more.
Plan Contents
- Several detailed and fully dimensioned part & assembly drawings
- All dimension in metric units (mm), ISO weld symbols
- Certificate of Compliance (CoC) for ADR 62 – Drawbar
- Comprehensive work & assembly instructions
- Electrical wiring diagram including round & flat plug wiring detail
- Detailed (enlarged) views of tricky or important bits
- Complete parts list of all manufactured & purchased components
- Complete cut list of all steel sections
- Welding details – where & how much of it
- A design that conforms to legal requirements
- Purchased item specifications
- Safety guidelines during construction
- Tools required
- Pictures & handy hints
- DXF files for parts that can be laser cut (Download a FREE DXF viewer here)
- All files in PDF format
Our plans and instructions are very detailed, comprehensive and easy to follow. Depending on the plan you choose, you will get a number of detailed drawings – at least one A4 drawing for each major assembly such as chassis assembly, body assembly, various sub-assemblies (tailgate, ramps…) and all major parts. Check the plan specifications for details. Furthermore, you will get detailed instructions, parts lists and material cut lists.
Instant Downloads
Get your plans in a flash. Depending on the payment option you choose, you will receive a download link as soon as payment has been finalized so you can get your plans and be up and running straight away.
You may also like…
